Details
Pilot valve with integral silencer and dust shroud to mount directly to dust collector diaphragm valve.
Suitable for:
RCAC20T3, RCAC20ST3, RCAC20DD3, RCAC20FS3, RCAC25T3, RCAC25DD3, RCAC25FS3 dust collector valves only.
Installation:
Ensure o-ring is in place on diaphragm valve cover. Gripping the shroud, hand tighten 3DS pilot valve onto cover od diaphragm valve. For reliable operation ensure supply voltage is within -10% and +15% of rated solenoid voltage. Solenoid is free to ratate on pilot valve. 3DS thread will suit 1/8 BSP T, 1/8 BSP P and 1/8 NPT ports. Replace pilot components within 1 million cycles.
Construction:
Body: Al 2011-T3
Armature: 430FR SS
Ferrule: 302 SS
Encapsulation: PA-6
Insulation: Class B/130 deg C
Seals: Nitrile
Shroud: PA-6
Operation:
Recommended on time range: 50-500ms
Recommended time between pulses: 1 minute or greater
Approvals:
- C-Tick
- EMC (89/336/CE)
Spare Parts
K0380 Nitrile replacement seal, armature, spring and ferrule.
k0384 As above in viton rubber.
Download the Goyen 3DS Pilot Valve Technical Specifications
Additional Information
| Connection Type | DIN 43650A |
|---|---|
| Protection Class | IP64 |
| Voltage | 24V 50/60Hz |
| Power | 23.1 VA |
You may also be interested in the following product(s)
$32.49
|
$71.35
|
